Fairings

This fairing was developed by us using the Ducati Bevel design from the Seventies as a base but featuring a "frenched in" headlight opening, ideal for 8" or the BMW/Bosch 215mm headlights. Made of GRP, finished in glossy white. It includes a pre-trimmed, pre-drilled and mated acrylic screen. It also includes our own design acrylic headlight cover, laser cut, pre-drilled and mated to the fairing, providing and elegant and neat flush aerodynamic fitting. This solution also provides a degree of protection from road debris and stone chips that can crack the expensive headlight glass.

It includes all the necessary stainless steel fasteners, special nylon cup washers and rubber washers plus a rubber edge trim to stop abrasion between the fairing and the screen. This new fairing is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a fairly smooth surface inside (we use GRP surface mat for a better finish) with our usual attention to details so no air bubbles, cracks, frayed edges etc.

Part of our BMW Package deals which include a spider web bracket, please click here for more details

Similar to the Ducati 750/900SS Bevel design from the Seventies with a 195mm headlight opening for the most commom round 7" headlights. Made of GRP, finished in glossy white. It includes a pre-trimmed, pre-drilled and mated acrylic screen plus our own design acrylic headlight cover, laser cut, pre-drilled and mated to the specially developed recess for the cover on the fairing, providing and elegant and neat flush fitting.

It includes all the necessary stainless steel fasteners, special nylon cup washers and rubber washers plus a rubber edge trim to stop abrasion between the fairing and the screen.

This new fairing is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a fairly smooth surface inside (we use GRP surface mat for a better finish) with our usual attention to details so no air bubbles, cracks, frayed edges etc.

Part of our BMW Package deals which include a spider web bracket, please click here for more details

Inspired by the old Sixties racing Manx fairings, we've developed and refined the lines of this Avon old design, presenting now sharper and more symmetrical lines, especilly around the screen. Made of GRP, finished in glossy white. It includes a pre-trimmed, pre-drilled and mated acrylic screen and as the fairing is produced in a split mould, it allow the fitting of clocks and gauges on its full dash.

We can pre-fit our own design acrylic headlight cover, laser cut, pre-drilled and mated to the fairing, providing and elegant an neat flush fitting, allowing the use on the road with a proper 7" headlight. This service is available for £39.99. Please inform us at checkout if you wish to add this option.

It includes all the necessary stainless steel fasteners, special nylon cup washers and rubber washers plus a rubber edge trim to stop abrasion between the fairing and the screen.

This new fairing is very sturdy, thick (typically between 4 to 6mm+), it will not flex or shake at speed. Very well finished with a fairly smooth surface inside (we use GRP surface mat for a better finish) with our usual attention to details so no air bubbles, cracks, frayed edges etc.

The iconic BMW R90S cockpit fairing, the first fairing to be fitted on a mass produced motorcycle from the manufacturer (discounting the small numbers of Vincent Black Prince and the Ariel Leader), it inspired countless designs including Guzzi LeMans, Kawasaki Z1R, Suzuki GS1000S etc, etc.

This kit is designed to fit any BMW R2v Series keeping a low cost (this kit is seriously expensive from BMW, at over £750 and not all parts are available or included!) and with a bit of thought, has been applied to other makes and models such as BMW R8v series, Moto Guzzis and even Ducati Monsters.

This new fairing is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a fairly smooth surface inside (we use GRP surface mat for a better finish) with our usual attention to details so no air bubbles, cracks, frayed edges etc. Complete with a full fitting kit that can be fitted to other makes and models using conventional telescopic forks with few minor modifications.

We also offer further options with this kit at extra cost, please click here for more details.

Inspired by the old Sixties Racing Manx fairings, we've developed and refined the lines of this old Avon Flowline design, presenting now sharper and more symmetrical lines, especilly around the screen. Made of GRP, finished in glossy white. It includes a pre-trimmed, pre-drilled and mated acrylic screen as as the fairing is produced in a split mould, it allow the fitting of clocks and gauges on its full dash.

It includes our own design acrylic headlight cover, laser cut, pre-drilled and mated to the specially developed recess for the cover on the fairing, providing and elegant and neat flush fitting., allowing the use on the road with a 7" or 8" headlight. The cover can be replaced by a numbered racing roundel!

It includes all the necessary stainless steel fasteners, special nylon cup washers and rubber washers plus a rubber edge trim to stop abrasion between the fairing and the screen.

This new fairing is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a fairly smooth surface inside (we use GRP surface mat for a better finish) with our usual attention to details so no air bubbles, cracks, frayed edges etc.

FlatRacer FlyScreen, designed and developed by us, to fit 8" headlights or the BMW/Bosch 215mm original headlight seen on R80/90/100.

Complete with full fitting kit that includes headlight brackets and stainless fasteners. GRP made, excellent quality, finished in glossy white gel coat and smoothly finished on the inside with GRP surface mat.

Not the usual rubbish full of cracks, air bubbles etc. Economical alternative to the cockpit and top fairings, it still provides a degree of wind protection and looks good in the process.

Can be fitted to many other makes and models with minor adjustments.

7" Flyscreen version coming soon, complete with headlight acrylic cover! Contact us for more details.

ABS plastic small cockpit fairing, finished in high gloss black so no need for further painting if black is your choice. Complete with a pre trimmed and pre-drilled dark tint screen plus it includes a fitting kit that uses your existing headlight brackets.

We have included in this kit our own high quality stainless steel fasteners kit that includes rubber and special black nylon cup washers plus a rubber edge seal that stops brasion between fairing and screen.

Fits on 7" or smaller headlight. Excellent value for money and a economical alternative to the larger cockpit and top fairings, it still provides a degree of wind protection and looks good in the process.

Screen for the Dart fairing, made of black tint acrylic, high quality and cut with precision to ensure fitting accuracy. Pre-drilled for your convenience, straight bolt on. Fitting kit also available separately, please see below for details.

Screen for the FlatRacer or Monza top fairing, made of clear acrylic, high quality and cut with precision to ensure fitting accuracy. Please note that these are supplied un-drilled and may require further trimming/cutting to fit your particular fairing. Grey tint colour available upon request and at additional cost, please enquire.

Screen for the Sprint top fairing, made of clear acrylic, high quality and cut with precision to ensure fitting accuracy. Please note that these are supplied un-drilled and may require further trimming/cutting to fit your particular fairing. Grey tint colour available upon request and at additional cost, please enquire.

Screen for the Flowliner top fairing (Avon Flowline), made of clear acrylic, high quality and cut with precision to ensure fitting accuracy. These are trimmed and cut from blank bubbles by us and take several hours to prepare hence the higher cost. Please note that these are supplied un-drilled and may require further trimming/cutting to fit your particular fairing if not supplied by us Grey tint colour available upon request and at additional cost, please enquire.

BMW R90S ccockpit fairing clear, standard size screen, it will fit all the BMW original fairings and our own replicas. Pre-trimmed and pre-drilled for fitting accuracy. Other options include flip oversize (3"), light or dark grey tint at additional cost, please contact us with your requirements.

Universal fitting, highly polished chrome headlight brackets, adjustable, fits forks between 30 to 38mm (approx). Complete with cuttable inner rubbers for optimum fit and vibration free. We use these brackets on our R90S cockpit fairing, modified to accept the BMW LH ignition switch. Other sizes available by request, please enquire.

Universal fitting, chrome headlight brackets, complete with zinc plated small fairing brackets. Adjustable, fits forks between 28 to 36mm (approx) although we did manage to fit on 38.5mm BMW forks with a bit of ingenuity. These are ideal if fitting a small fairing or fly screen to your bike or new brackets can be fabricated and attached to the headlight side brackets on their slotted nounting holes, offering great scope for adjustment. We use these brackets on our FlyScreens, modified to accept the BMW LH ignition switch. Insulating rubbers are available at extra cost, please contact us with your equirements.

Universal fitting zinc plated small fairing brackets. Adjustable, fits existting headlight brackets and can be used to fit many different small cockpit fairings or fly screens with a bit of ingenuity as these offer great scope for adjustment. As supplied with the Dart fairinh kit above.