Cosmetic Cafe Racer Parts

Front mudguard

Fits all R2v series /6 series onwards, 24cm shorter than original, bead edge all around as per original, GRP made, excellent quality, glossy white finish. Pre-marked drill points for fitting accuracy. Compatible with all BMW and Specialists fork braces / mudguard holders on all /6 and /7 series up to 1984 (Twinshocks).   Price is £29.75 or €35 plus shipping.

Top fairing - FlatRacer

Based on a Ducati 750/900SS design from the Seventies with a headlight opening based on a BMW R90S fairing to accept BMW´s Bosch headlights. Made of GRP, finished in glossy white. Excellent quality and finish, not the usual rubbish full of cracks, air bubbles etc. Pre drill marks present for accuracy of fitting the screen.   Price is £120 or €145 plus shipping.

Top fairing - Ducati

Similar to the Ducati 750/900SS Bevel design from the Seventies with a 190mm headlight opening for the most commom round headlights. Made of GRP, finished in glossy white. Excellent quality and finish, not the usual rubbish full of cracks, air bubbles etc. Centre pre drill mark present for accuracy when fitting the screen.    Price is £120 or €145 plus shipping.

Out of stock at present, will be available early March

Screen

Screen for FlatRacer top fairing or Ducati 750/900SS top fairing replica, made of clear acrylic, high quality and cut with precision to assure fitting accuracy. Please note that these are supplied un-drilled. Other colours available upon request and stock, please enquire.
  Price is £50 or €60 for clear screen plus shipping.

Spyder Web

Designed to mate the FlatRacer and Ducati fairings above to the BMW R Series /6, /7 and Monolevers, will attach the original BMW headlight and secure the fairing, low line design but will not interfering with front suspension movement. Made of thick plate steel and semi black powder coated for long life. Price is £69.99 or €80 plus shipping.

Out of stock at present, will be available early March

Fuel Tank

Designed and developed by me, to fit all BMW´s R2v series BMW (1969-1995) Airheads, including all Monolevers.Front, rear mounts and fuel tap lugs as per original. GRP made, excellent quality, very sturdy, finished in glossy white with special inner coating for fuel resistance. Not the usual rubbish full of cracks, air bubbles etc.   Price is £250 or €300 plus shipping.

Monza Tank Fuel Cap

Fuel cap designed to fit the FlatRacer tank, held by fixing/sealing compound like Wurth's (fuel resistant) on the tank filler neck. Quite stylish and effective. Please note that these fuel caps are not the key locking type.
   Price is £25 or €30 plus shipping.

Tail section - Knoscher type

Tail section specifically designed for the all R2v series bar GS and later Paralevers. Made of GRP, glossy white finish, no imperfections, air bubbles, cracks etc as commonly found, truly excellent quality! Recessed area in the back for 70mm BMW round logo. Fits as stressed element by inserting tail front peg on frame centre tube.   Price is £110 or €130 plus shipping.

Out of stock at present, will be available early March

Upholstered Seat Base

Upholstered seat base, designed to fit the Knoscher typre tail section, bolts on the tail by 8xM6 bolts. Tail has pre-drilled marks for this seat base. Finished in high quality black vinyl. Optional alloy trim for an extra £5 or €6, depending on stock. Very comfortable and smart.
    Price is £69.99 or €80 plus shipping.

Tail Light - Round.

Round tail light finished in chrome, with presence and stop lights, fits and looks quite nicely with the tail section. Simple three (3) wires connection. Available also in black for £10 or €12.
 
    Price is £13 or €15 for Chrome Tail Light plus shipping.

Pair Side Panels

Replica of BMW R2v series side panels used from mid-seventies onwards, will fit all Airheads.
Made of GRP, finished in glossy white gel coat, excellent quality, not the usual rubbish full of cracks, air bubbles, deformations etc.Fixing as per original with metal hooks to fix original rubber band. Sold as a pair. Price is £40 or €48 plus shipping.

Out of stock at present, will be available early March

BMW 1977 RS Sports Seat with Cowl

Replica of the 1977 BMW R100RS complete seat with fairing & hand peg cowls. Seat base is made of GRP finished in semi gloss black. Cowls are finished in glossy white. Seat cover is exactly as per original. Drill points pre-marked for fitting accuracy, pre-marked cutting area for hand pegs. Excellent build quality, interchangeable with original parts. Price for the kit is £275 or €330 plus shipping.

Out of stock at present, will be available early March

BMW R90S Cockpit Fairing

Replica of the 1974 BMW R90S cockpit fairing, a classic! Made of GRP, finished in glossy white. excellent quality, sturdy and very well finished. Drill marks are pre-marked for fitting accuracy.Will accept all BMW-Bosch 215mm headlights or any other 7" headlight.Classic looks, very attractive frenched in headlight. Price is £72.5 or €85 plus shipping.

BMW R90S Cockpit Fairing Screen

Screen designed to fit the R90S cockpit fairing. Made of tough acrylic. Available in clear or other colours upon request, oversize screens also available depending on availability. Please enquire if interested in different specification Screen is supplied already pre-drilled for your convenience.
    Price for standard clear screen is £50 or €60 plus shipping.

BMW R90S Cockpit fairing Gauge Dash Pod

Original BMW gauge dash pod, holds the original BMW voltmeter and clock or any other gauge you want to fit (52mm). Neat and tidy for little outlay.

   Price is £30 or €35 plus shipping.

BMW 70mm badge

BMW roundel badge, 70mm diameter, as used on original BMW seats ans tanks, fits the Knoscher type of tail section or the 3/4 seat assembly as per fitted on the 1977 BMW R100RS. Very high quality, self-adhesive. Other sizes including 12, 21, 27, 45, 50, 60, 81mm available, please enquire.    
  Price is £7.50 or €9 plus shipping.

Here's a selection of parts that we do have available, more tasty goods will be added in the near future, so stay in tune.

Please note that we sell a huge range of parts, brand new original BMW or high quality patterns, along with a small selection of used parts for thse BMW R series, please do contact us with your wish list or special requests, we'll be more than happy to assist you.

We'll accept Bank Transfer, UK drawable personal cheque/postal order or PayPal in lower values, valid for Verified Members only. Please note that goods will only be released after payment is made good.

You can pay by PayPal, using the buttons next to the kit (Add to Cart). Shipping costs will be calculated depending on your location and method of shipping and a separate PayPal invoice will be sent to you shortly afterwards. This is due to the huge variations in size and weight of our parts that affect the shipping costs, especially International consignments.
 
All shipping to be recorded and insured at buyers expense. Please do contact us for the shipping costs quotation before your purchase.

Contact us!