BMW Airhead mudguards

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless rear mudguard. Particularly suited for cowled seats.

This kit comprises a 5" (127mm) wide polished stainless steel mudguard, rounded shape (C type), a especially adapted black plate holder and a Lucas L679 tail light. The overhang at the rear is circa 350mm but can be increased up to 500mm by special request (please beware of the increased volumetric weight therefore higher shipping costs). Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW Airheads made between 1974 to 1984, fitted with the S type, Dual Sport cowled seat including the R80/100 RS, RT, S. CS, S, CS, T etc. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

£149.99

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless rear mudguard. Particularly suited for cowled seats.

This kit comprises a 6" (152mm) wide polished stainless steel mudguard, flatter centre shape (D type), a especially adapted black plate holder and a Lucas L679 tail light. The overhang at the rear is circa 350mm but can be increased up to 500mm by special request (please beware of the increased volumetric weight therefore higher shipping costs). Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW Airheads made between 1974 to 1984, fitted with the S type, Dual Sport cowled seat including the R80/100 RS, RT, S. CS, S, CS, T etc. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

£149.99

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless steel mudguard. Particularly suited for uncowled original BMW seats (as fitted on /5, /6 and some unfaired /7 Series), Cafe Racer seats or tail sections.

This mudguard kit comprises a polished 5" (127mm) wide stainless steel mudguard, rounded shape (C type), pre-trimmed and pre-drilled to accept a Lucas L564 tail light alloy chrome plated assembly. The overhang at the rear is circa 350mm but can be increased up to 500mm by special request. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap. Other rear lights including Sparto can be fitted at no extra cost.

This mudguard will fit all BMW Airheads made between 1970 to 1993, including the /5 (SWB & LWB), /6, /7, R45/65 and Monolever road models. An alloy version is available by special request at no extra cost, depending on availability. Please specify your model and year when ordering.

£139.99

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless steel rear mudguard. Particularly suited for uncowled original BMW seats (as fitted on /5, /6 and some unfaired /7 Series), Cafe Racer seats or tail sections.

This mudguard kit comprises a 6" (152mm) wide stainless steel mudguard, flat centre shape (D type), pre-trimmed and pre-drilled to accept a Lucas L564 tail light alloy chrome plated assembly. The overhang at the rear is circa 350mm but can be increased up to 500mm by special request. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap. Other rear lights including Sparto can be fitted at no extra cost.

This mudguard will fit all BMW Airheads made between 1970 to 1993, including the /5 (SWB & LWB), /6, /7, R45/65 and Monolever road models. An alloy version is available by special request at no extra cost, depending on availability. Please specify your model and year when ordering.

£139.99

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless steel rear mudguard. Particularly suited for uncowled original BMW seats (as fitted on /5, /6 and some unfaired /7 Series), Cafe Racer seats or tail sections.

This mudguard kit comprises a polished 5" (127mm) wide stainless steel mudguard, rounded shape (C type), pre-trimmed and pre-drilled to accept a Lucas L564 tail light alloy chrome plated assembly. The overhang at the rear is circa 150mm (total lenght along its curvature is circa 900mm). Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap. Other rear lights including Sparto can be fitted at no extra cost.

This mudguard will fit all BMW Airheads made between 1970 to 1993, including the /5 (SWB & LWB), /6, /7, R45/65 and Monolever road models. An alloy version is available by special request at no extra cost, depending on availability. Please specify your model and year when ordering.

£119.99

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless steel rear mudguard. Particularly suited for uncowled original BMW seats (as fitted on /5, /6 and some unfaired /7 Series), Cafe Racer seats or tail sections.

This mudguard kit comprises a 6" (152mm) wide stainless steel mudguard, flat centre shape (D type), pre-trimmed and pre-drilled to accept a Lucas L564 tail light alloy chrome plated assembly. The overhang at the rear is circa 150mm (total lenght along its curvature is circa 900mm) Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap. Other rear lights including Sparto can be fitted at no extra cost.

This mudguard will fit all BMW Airheads made between 1970 to 1993, including the /5 (SWB & LWB), /6, /7, R45/65 and Monolever road models. An alloy version is available by special request at no extra cost, depending on availability. Please specify your model and year when ordering.

£119.99

Medium polished stainless steel rear mudguard, 5" or 6" wide, pre--trimmed and pre-drilled to fit all BMW R2v Series bikes (please specify your model and year and desired width). The overhang at the rear is circa 150mm (total lenght along its curvature is circa 900mm) Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap. Discreet and efficient. Alloy versions and longer mudguards are also available at extra cost, depending on availability. Please contact us with your requirements.

£79.99

Short polished stainless steel rear mudguard, 5" or 6" wide, pre--trimmed and pre-drilled to fit all BMW R2v Series bikes (please specify your model and year and desired width). Total lenght along its curvature is circa 360mm. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap. Discreet and efficient, especially suited for Cafe Racer projects. Alloy version (5") is also available at no extra cost, depending on availability. No other components included, photo of it installed for illustration purpose only.

£44.99

£59.99

Stainless steel short front mudguard, circa 630mm lenght, 5" wide (127mm) pre-trimmed and pre-drilled to fit onto the original BMW mudguard holders, fitted on /6 and /7 Series bikes, made between 1974 to 1984. Comes complete with all the necessary stainless steel fasteners including dome nuts and rubber washers, making this kit a very straight forward swap. Discreet and efficient, especially suited for Cafe Racer projects. Original BMW mudguard holder not included, for illustration purpose only.

£59.99

Stainless steel short front mudguard, circa 20mm longer than the original BMW /6 & /7 mudguard, narrow 4" wide (101mm) pre-trimmed and pre-drilled to fit onto the original BMW mudguard holders, fitted on /6 and /7 Series bikes, made between 1974 to 1984. Comes complete with all the necessary stainless steel fasteners including dome nuts and rubber washers, making this kit a very straight forward swap. Discreet and efficient, especially suited for Cafe Racer projects. Can be shortened by special request, please contact us with your requirements. No other components included, photo of it installed for illustration purpose only.

£149.99

Designed to fit BMW R /6 & /7 fitted with ATE brakes system bikes made between 1973 to 1980, very sturdy and proven design, will enhance the roadholding qualities of your BMW. This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs. Made of thick steel and powder coated for a long life. Complete with our own short 5" rounded C shape stainless steel front mudguard, pre-trimmed and pre-drilled, includes all the necessary stainless steel fastners and rubber washers.

£149.99

Designed to fit BMW R /6 & /7 Series bikes fitted with the later Brembo front brakes set up (81-84) and the ST/GS models made between 1980 to 1987 plus the R45/65 and Monolever bikes with few minor modifications , very sturdy and proven design, will enhance the roadholding qualities of your BMW. This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs. Made of thick steel and powder coated for a long life. Complete with our own short 5" rounded C shape stainless steel front mudguard, pre-trimmed and pre-drilled, includes all the necessary stainless steel fastners and rubber washers.

£134.99

Designed to fit BMW R /6 & /7 fitted with ATE brakes system bikes made between 1973 to September 1980, very sturdy and proven design, will enhance the roadholding qualities of your BMW. This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs. Made of thick steel and powder coated for a long life. Complete with our own short GRP front mudguard, pre-trimmed and pre-drilled, includes all the necessary stainless steel fastners and rubber washers.

£134.99

Designed to fit BMW R /6 & /7 Series bikes fitted with the later Brembo front brakes set up (81-84) and the ST/GS models made between 1980 to 1987 plus the R45/65 and Monolever bikes with few minor modifications , very sturdy and proven design, will enhance the roadholding qualities of your BMW. This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs. Made of thick steel and powder coated for a long life. Complete with our own short GRP front mudguard, pre-trimmed and pre-drilled, includes all the necessary stainless steel fastners and rubber washers.

Short front mudguard developed exclusively by us based on an original /5 Series narrow front mudguard, 24cm shorter than original /5 Series BMW item, bead edge all around as per original. It will fit all our own tubular steel fork braces plus the /5 Series bikes if the stay brackets are modified or new ones fabricated from scratch. GRP made, excellent quality, glossy white finish. Drill marks present for drilling accuracy. Compatible with all BMW /6 & /7 mudguard holders and Specialists fork braces.

£29.99

Short front mudguard developed exclusively by us based on an original /6 Series wide front mudguard, 24cm shorter than original /6 Series BMW item, bead edge all around as per original. It will fit all our own tubular steel fork braces plus all the /6 and /7 Series bikes made between 1973 to 1984. GRP made, excellent quality, glossy white finish. Pre-drilled for fitting accuracy. Compatible with all BMW original /6 & /7 mudguard holders and Specialists fork braces. Can be made to fit the R45/65 and Monolver bikes if used in conjunction with our tubular steel fork brace and few minor modifications.

£29.99

Accurate replica of the original BMW /6 & /7 Series front mudguard developed exclusively by us. Sturdier than the original item and very well finished, with our usual attention to detail. It will fit all our own tubular steel fork braces plus all the /6 and /7 Series bikes made between 1973 to 1984. GRP made, excellent quality, glossy white finish. Pre-drilled for fitting accuracy. Compatible with all BMW original /6 & /7 mudguard holders and Specialists fork braces. Can be made to fit the R45/65 and Monolver bikes if used in conjunction with our tubular steel fork brace and few minor modifications.

£39.99