BMW Airhead Maintenance

All the necessary consumable components for a full engine rebuild, which includes: 
Full gasket set (bottom and top end)Full set of O-rings, seals and varied rubbers etc for bottom and top endFull set of piston rings (for the two pistons)Pistons little end bushesPiston gudgeon pins (includes circlips)Engine bearing set (big end shells and crank main bearing)Rods' big end stretch bolts (set of 4)Oil pump (complete with inner and outer rotor)Oil pressure relief valve (with spring)Cam chain replacement kit (chain, tensioner spring, circlip, and slipper rail)Camshaft outrigger bearingFlywheel stretch bolts (set of 5)Set of stainless steel pushrod tubes (set of 4)

Please indicate your bike's model, year, frame and engine number and the desired specification for the piston rings, the crank rod bearings and the rod's big ends (STD, oversize and coded colour for the crank bearing if not regrinding). Sold individually: £479.99

Save £40

£439.99

All the parts and consumables except fluids required for a regular 10,000 mile service (8,000 for 5 series). it includes:
K&N replacement air filter (the best in business)Oil filterOil filter gaskets and o-ringsRocker cover gaskets (necessary after adjusting valves)Contact breakersNGK Iridium spark plugsAll the necessary crush washers for diff, prop shaft, gearbox and engine oil plugs

This kit is an upgraded version of our basic service kit and includes the best replacement air filter you can fit which will pay itseld in short time by being re-washable and re-usable, offering excellent filtration and improved performance and economy.

It also includes the outstanding NGK Iridium spark plugs providing superior gas flow properties due to its extremely small diameter electrode. It demands lower voltage to operate, which improves starting, idling and throttle response. All these attributes and qualities provides your engine with enhanced ignition efficiency, better acceleration, faster starting , smoother running, longer life and better fuel consumption. Please indicate your bike's model and year when ordering this kit.

£84.99

All the parts and consumables except fluids required for a regular 10,000 mile service on any Airhead produced after 1981, it includes:
K&N replacement air filter (the best in business)Oil filterOil filter gaskets and o-ringsRocker cover gaskets (necessary after adjusting valves)NGK Iridium spark plugsAll the necessary crush washers for diff, prop shaft, gearbox and engine oil plugs

This kit is an upgraded version of our basic service kit and includes the best replacement air filter you can fit which will pay itseld in short time by being re-washable and re-usable, offering excellent filtration and improved performance and economy.

It also includes the outstanding NGK Iridium spark plugs providing superior gas flow properties due to its extremely small diameter electrode. It demands lower voltage to operate, which improves starting, idling and throttle response. All these attributes and qualities provides your engine with enhanced ignition efficiency, better acceleration, faster starting , smoother running, longer life and better fuel consumption. Please indicate your bike's model and year when ordering this kit.

£94.99

Rebuild kit to overhaul your bike's cylinder heads, consisiting of top quality two inlet valves, two exhaust valves, four bronze valve guides, two pairs of valve collets, four valve springs and a top end gasket set with all the necessary gaskets, rubbers, seals and o-rings necesary to carry out this rebuild. A great way to restore the lost performance and improve your engine economy and efficiency. Please specify your bike's model and year when ordering this kit.

£339.99

K&N needs no introduction, the best replacememt air filter for your bike, washable and re-usable, it uses premium quality oiled cotton gauze sandwiched between layers of wire screen. Except under very dusty conditions K & N filters will only need washing and re-oiling every 10,000 to 15,000 miles. Excellent filtration with improved air flow. Direct replacement of your original cylindrical paper air filter(fitted on Airheads between 1969-1980), easily fitted in minutes.

£34.99

K&N needs no introduction, the best replacememt air filter for your bike, washable and re-usable, it uses premium quality oiled cotton gauze sandwiched between layers of wire screen. Except under very dusty conditions K & N filters will only need washing and re-oiling every 10,000 to 15,000 miles. Excellent filtration with improved air flow. Direct replacement of your original rectangular paper air filter(fitted on Airheads between 1981-1996), easily fitted in minutes.

£54.99

EBC FA22 front brake pads, one set for one ATE sliding calliper, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life.
Sold as one set per brake calliper. If your bike is equipped with twin discs, please order two items.

£24.99

EBC FA18 front brake pads for bikes made after 1981 equipped with Brembo brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Harder, HH racing type brake pads also available at extra cost, please contact us if you require such set. Sold as one set per brake calliper. If your bike is equipped with twin discs, please order two items.

£19.99

EBC FA57 front brake pads for the BMW R45/65 series equipped with silver ATE brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Sold as one set per brake calliper. If your bike is equipped with twin discs, please order two items.

£19.99

EBC FA171 front brake pads for Monolever bikes with twin discs made after August 1988 equipped with Brembo brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Harder, HH racing type brake pads also available at extra cost, please contact us if you require such set. Sold as one set per brake calliper. Please order two items for two discs.

£19.99

EBC FA77 front brake pads for Monolever bikes with front single disc made after 1985 equipped with Brembo brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Sold as one set per brake calliper.

£19.99

EBC FA407 front brake pads for Paralevers bikes with twin discs made after August 1988 equipped with Brembo brake calliper with four opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Harder, HH racing type brake pads also available at extra cost, please contact us if you require such set. Sold as one set per brake calliper. Please order two items for two discs.

£22.99

EBC FA18 rear brake pads for bike equipped with a rear disc and a Brembo brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Harder, HH racing type brake pads are also available at extra cost, these are essential if running HH pads at the front, in order to avoid brake imbalance, please contact us if you require such set. Sold as one set per brake calliper.

£19.99

EBC brake shoes for bikes equipped with front brake drums, commonly found on /5 & /6 Series. consisting of two brake shoes, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Two shoes per set. Other spares parts are also availabe by request, such as springs, rubber damper, seals, o-rings, circlips, etc. please contact us with your requirements.

£37.99

EBC brake shoes for bikes equipped with rear brake drums, consisting of two brake shoes, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Two shoes per set. Other spares parts are also availabe by request, such as springs, rubber damper, seals, o-rings, circlips, etc. please contact us with your requirements. Please specify your bike's model and year when ordering this set.

£39.99

These EBC Pro-lite replacement discs (front or rear) offer higher (18% extra) braking power over stainless steel discs. The fully floating design reduces un-sprung weight, eliminates rotor distortion and extends pad life. EBC discs have been designed to be used with matching new EBC brake pads and these must be used or the warranty will be invalidated. Sold as a single disc, please state your bike's year and model, front or rear fitting with your order.

£154.99

Original BMW brake disc, shallow throw, to fit all Airheads (apart from R45/65) from 1974 up to 1984, to fit front sinngle or twin disc machines, also used as a rear disc on these models. Recommended for those who demand originality above anything else. Sold as a single disc. Please state your bike's year and model, front or rear fitting with your order.

£229.99