BMW Airhead Maintenance

These EBC Pro-lite replacement discs (front or rear) offer higher (18% extra) braking power over stainless steel discs. The fully floating design reduces un-sprung weight, eliminates rotor distortion and extends pad life. EBC brake pads must be used or the warranty will be invalidated. Sold as a single disc, please state your bike's year&model with your order. Deep throw fitting (R45/65 not LS, GS and ST models) plus bikes fitted with two rib hubs such as ex-police - TIC)

£154.99

These EBC Pro-lite replacement discs (front or rear) offer higher (18% extra) braking power over stainless steel discs. The fully floating design reduces un-sprung weight, eliminates rotor distortion and extends pad life. EBC brake pads must be used or the warranty will be invalidated. Sold as a single disc, please state your bike's year and model, side, front or rear fitting with your order. Shallow throw, fitted to most bikes made between 74-84 including the R65 LS.

£154.99

These EBC Pro-lite replacement discs (front or rear) offer higher (18% extra) braking power over stainless steel discs. The fully floating design reduces un-sprung weight, eliminates rotor distortion and extends pad life. EBC brake pads must be used or the warranty will be invalidated. Sold as a single disc, please state your bike's year and model, side, front or rear fitting with your order. Fits all Monolever bikes, made post 1985.

£154.99

These EBC Pro-lite replacement discs (front or rear) offer higher (18% extra) braking power over stainless steel discs. The fully floating design reduces un-sprung weight, eliminates rotor distortion and extends pad life. EBC brake pads must be used or the warranty will be invalidated. Sold as a single disc, please state your bike's year and model, side, front or rear fitting with your order. Fits all Paralever models, including the Mystic, GS Paris Dakar and R.

£154.99

Original BMW brake disc, shallow throw, to fit all Airheads (apart from R45/65) from 1974 up to 1984, to fit front sinngle or twin disc machines, also used as a rear disc on these models. Recommended for those who demand originality above anything else. Sold as a single disc. Please state your bike's year and model, front or rear fitting with your order.

£274.99

EBC FA22 front brake pads, one set for one ATE sliding calliper, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life.
Sold as one set per brake calliper. If your bike is equipped with twin discs, please order two items.

£24.99

EBC FA18 front brake pads for bikes made after 1981 equipped with Brembo brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Harder, HH racing type brake pads also available at extra cost, please contact us if you require such set. Sold as one set per brake calliper. If your bike is equipped with twin discs, please order two items.

£19.99

EBC FA57 front brake pads for the BMW R45/65 series equipped with silver ATE brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Sold as one set per brake calliper. If your bike is equipped with twin discs, please order two items.

£19.99

EBC FA171 front brake pads for Monolever bikes with twin discs made after August 1988 equipped with Brembo brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Harder, HH racing type brake pads also available at extra cost, please contact us if you require such set. Sold as one set per brake calliper. Please order two items for two discs.

£19.99

EBC FA77 front brake pads for Monolever bikes with front single disc made after 1985 equipped with Brembo brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Sold as one set per brake calliper.

£19.99

EBC FA407 front brake pads for Paralevers bikes with twin discs made after August 1988 equipped with Brembo brake calliper with four opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Harder, HH racing type brake pads also available at extra cost, please contact us if you require such set. Sold as one set per brake calliper. Please order two items for two discs.

£22.99

EBC FA18 rear brake pads for bike equipped with a rear disc and a Brembo brake calliper with two opposed pistons, consisting of two brake pads from EBC, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Harder, HH racing type brake pads are also available at extra cost, these are essential if running HH pads at the front, in order to avoid brake imbalance, please contact us if you require such set. Sold as one set per brake calliper.

£19.99

EBC brake shoes for bikes equipped with front brake drums, commonly found on /5 & /6 Series. consisting of two brake shoes, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Two shoes per set. Other spares parts are also availabe by request, such as springs, rubber damper, seals, o-rings, circlips, etc. please contact us with your requirements.

£37.99

EBC brake shoes for bikes equipped with rear brake drums, consisting of two brake shoes, manufactured right here UK. Amazing stopping qualities, both in dry or wet, with long lasting life. Two shoes per set. Other spares parts are also availabe by request, such as springs, rubber damper, seals, o-rings, circlips, etc. please contact us with your requirements. Please specify your bike's model and year when ordering this set.

£39.99

Stainless steel braided flexible of one brake line kit. Manufactured from the highest quality stainless steel swaged fittings permanently attached to a clear sleeved stainless steel braided Teflon hose. Stainless fittings offer safety, security and a slim line attractive finish and corrosion proof. This kit contain all items required for a complete installation including stainless steel banjo bolts and copper washers. Press More Info for further details.

£29.99

Stainless steel braided flexible of two brake line kit. Manufactured from the highest quality stainless steel swaged fittings permanently attached to a clear sleeved stainless steel braided Teflon hose. Stainless fittings offer safety, security and a slim line attractive finish and corrosion proof. This kit contain all items required for a complete installation including stainless steel banjo bolts and copper washers. Press More Info for further details.

£59.99

Stainless steel braided flexible of three brake line kit. Manufactured from the highest quality stainless steel swaged fittings permanently attached to a clear sleeved stainless steel braided Teflon hose. Stainless fittings offer safety, security and a slim line attractive finish and corrosion proof. This kit contain all items required for a complete installation including stainless steel banjo bolts and copper washers. Press More Info for further details.

£89.99

Stainless steel braided flexible of four brake line kit. Manufactured from the highest quality stainless steel swaged fittings permanently attached to a clear sleeved stainless steel braided Teflon hose. Stainless fittings offer safety, security and a slim line attractive finish and corrosion proof. This kit contain all items required for a complete installation including stainless steel banjo bolts and copper washers. Press More Info for further details.

£119.99

Stainless steel blled nipple, replaces existing original one, which very often is corroded, seized in place, with the faces rounded off, making it almost impossible to remove. Fit one of these little numbers for corrosion free life and peace of mind, no more swearing when bleeding the brakes! M10 thread, it fits all ATE and Brembo brake callipers originally fitted on these Airheads. Sold per unit.

£4.99

Unfortunately, due to age, normal wear and tear and the hygoscopic effect on the brake fluid, whcih causes it to absorb water with the inevitable corrosion on steel components such as the master cylinders and brake pistons, allied to lack of maintenance, forces a full rebuild of these brake ATE swinging callipers. This kit includes a brand new 38mm piston (size is stamped on the calliper) plus the necessary seal and dust cover. Essential for a proper and correct overhaul.

£94.99

Unfortunately, due to age, normal wear and tear and the hygoscopic effect on the brake fluid, whcih causes it to absorb water with the inevitable corrosion on steel components such as the master cylinders and brake pistons, allied to lack of maintenance, forces a full rebuild of these brake ATE swinging callipers. This kit includes a brand new 40mm piston (size is stamped on the calliper) plus the necessary seal and dust cover. Essential for a proper and correct overhaul.

£89.99

£34.99

Unfortunately, due to age, normal wear and tear and the hygoscopic effect on the brake fluid, whcih causes it to absorb water with the inevitable corrosion on steel components such as the master cylinders and brake pistons, allied to lack of maintenance, forces a full rebuild of these brake ATE callipers (similar to the Brembo twin piston). This kit includes a brand new seals, dust covers and circlips for one calliper. Essential for a proper and correct overhaul.

£49.99

Unfortunately, due to age, use and the hygoscopic effect on the brake fluid, whcih causes it to absorb water with the inevitable corrosion on steel components such as the master cylinders and brake pistons, allied to lack of maintenance, forces a full rebuild of these Brembo P8 brake callipers. This kit contains the 2 oil seals, dust covers, O-ring and two pistons. These callipers were also used on some Laverdas, Moto Guzzis, Benellis and MZs . Kits also available for the later (post 85) P9 callipers

£54.99

Unfortunately, due to age, use and the hygoscopic effect on the brake fluid, whcih causes it to absorb water with the inevitable corrosion on steel components such as the master cylinders and brake pistons, allied to lack of maintenance, forces a full rebuild of these ATE master cylinders located under the tank. Fitsthe R90S with 17mm master cylinder from 09/75 as well as all 1976 to 80 twin disc models. This kit contains the piston, 2 oil seals, rubber cap, circlip, O ring, washer and external dust cover, Kits also available for the early R90S master culinder (16mm) at no extra cost and for the single disc model for a small additional cost.